Afina Signature cabinets are made of rust proof satin anodized aluminium. They have no visible hinges and feature a three mirror design. The adjustable glass shelves are engineered to the highest standards of today`s technology for long lasting durab ility and elegance. Features: -Signature collection -Gliding door recessed medicine cabinet -Available in over 40 frame styles & colors -Available in 2 sizes: -27" W x 21" H -33" W x 23" H -Finger grips ground into mirrored doors -0.375" thick adjust able glass shelves -Ball bearing wheels for easy operation -Rust proof gray satin anodized aluminum construction -Frame will add to overall dimensions, please see specifications sheet for exact outside dimensions by frame style -Overall Dimensions: 2 1 - 23" H x 27 - 33" W Options -Optional 5x magnifying mirror available -Optional mirrored sides with surface mounting hardware available for surface mounting Care -For care use a mild cleanser, applied first to a rag or paper towel -Do not spray cle aner directly onto the mirror or frame Installation Instructions: -For protection during shipping glass shelves are placed inside cabinet body -They are label marked "GLASS SHELVES" , please remove before installation -Shelf pins are inside the cabin et in an envelope marked "SHELF PINS", remove before installation -Doors must be removed from cabinet before installation -Cabinet body must be level and plumb upon installation -Use a leveling instrument to ensure accuracy, or door may not close and /or secure itself properly -Top of cabinet has a deeper track than bottom to hold glass doors in place -2 roller wheels must be tightly in bottom of each mirror door and ends of each door -Place first door into the upper rear track and gently let dow n into corresponding rear bottom track -Repeat for next mirror door but using the front track -When recessing, use the two pre-drilled holes (top and bottom) on each side of the cabinet interior -Screws are not supplied Surface Mounting Instructions -Determine the location of the cabinet on your wall -Draw a level horizontal line on wall at desired height for top back edge of cabinet -Line up long thin aluminum strip (holes on the bottom) with horizontal line -Secure strip with screws (not inclu ded). Strip must be well secured -Insert 2 surface mount hooks (with NO holes) into back slot in the middle on the TOP of cabinet -Slide one to each extreme (left side and right side) - Repeat previous step with 2 surface mount hooks (WITH holes) on bottom of cabinet -Pick up cabinet and hook the 2 Top surface mount hooks into the thin aluminum strip already mounted to the wall - Secure the 2 Bottom surface mount hooks into the wall with screws (not included) -Each hook must be to the extreme le ft and right, and properly secured - PARTS INCLUDED: 1 Thin aluminum strip with multiple holes 2 Top surface mount hooks - with no holes 2 Bottom surface mount hooks - with holes NOTE: If you are mounting the mirrored sides, peel off double-sided tap e, align the wood strip to the back of the cabinet - making sure front is flush - and press firmly. For more information on this product please view the specification sheet seen below. Specification Shee