Afina Signature cabinets are made of rust proof satin anodized aluminium. They have no visible hinges and feature a three mirror design. The adjustable glass shelves are engineered to the highest standards of today`s technology for long lasting durab ility and elegance. Features: -Signature collection -Recessed triple door medicine cabinet -Available in over 40 frame styles & colors -Available in the following sizes: -34" W x 30" H -38" W x 30" H -44" W x 30" H -47" W x 36" H -0.75" perimeter bev el mirror standard -0.37" thick adjustable glass shelves -Rust proof gray satin anodized aluminum construction -3 mirror design (front bevel mirror, mirror behind door and inside mirror back) -Frame will add to overall dimensions, please see specific ations sheet for exact outside dimensions by frame style -Optional mirrored sides for surface mounting available Specifications -Cabinet measures 4.37" in depth -With recessed mount, less then 4" go into wall, the frame is completely flush to the wal l -Door has pivot hinge which pivots into cabinet body -Hinge is securely screwed into the door for ease of removal and remounting the door -Frame is independent of door and is mounted to the perimeter of cabinet body Options -Optional 5x magnifying mirror available -Optional mirrored sides with surface mounting hardware available for surface mount Care -For care use a mild cleanser, applied first to a rag or paper towel -Do not spray cleaner directly onto the mirror or frame Installation Instru ctions: -For protection during shipping glass shelves are placed inside cabinet body - They are label marked "GLASS SHELVES" , please remove before installation - Shelf pins are inside the cabinet in an envelope marked "SHELF PINS", remove before ins tallation -Cabinet body must be level and plumb upon installation - Use a leveling instrument to ensure accuracy, or door may not close and/or secure itself properly -When recessing, use the two pre-drilled holes (top and bottom) on each side of the cabinet interior - Screws are not supplied Surface Mounting Instructions -Determine the location of the cabinet on your wall -Draw a level horizontal line on wall at desired height for top back edge of cabinet -Line up long thin aluminum strip (holes on the bottom) with horizontal line -Secure strip with screws (not included). Strip must be well secured -Insert 2 surface mount hooks (with NO holes) into back slot in the middle on the TOP of cabinet -Slide one to each extreme (left side and right side) - Repeat previous step with 2 surface mount hooks (WITH holes) on bottom of cabinet -Pick up cabinet and hook the 2 Top surface mount hooks into the thin aluminum strip already mounted to the wall - Secure the 2 Bottom surface mount hooks into the wall with screws (not included) -Each hook must be to the extreme left and right, and properly secured - PARTS INCLUDED (when Surface Mount kit is purchased): 1 Thin aluminum strip with multiple holes 2 Top surface mount hooks - with no holes 2 Bottom surface mount hooks - with holes NOTE: If you are mounting the mirrored sides, peel off double-sided tape, align the wood strip to the back of the cabinet - making sure front is flush - and press firmly. For more information on this product pl ease view the specification sheet seen below. Specification Shee